Pallet_Racking_-_Selective_S.jpg  Selective_racking94.JPG

 Selective_racking185.JPG

Selective_racking182.JPG

Longspan_shelving_small32.JPG

Longspan Shelving

Longspan_Racking2_S.jpg

Garage Shelving

Longspan_Racking3_S.jpg

Warehouse Shelving

Garage_shelving_small27.JPG

 

LD_Cantilever_small15.JPG

Light Duty Cantilever

HD_Cantilever_small23.JPG

Heavy Duty Cantilever

LD_Cantilever_small28.JPG

HD_Cantilever_small17.JPG

 

RS_Mezzanine_small18.JPG

Rack Supported Mezzanines

S_Mezzanine_small18.JPG

Structural Mezzanines

RS_Mezzanine_small224.JPG

S_Mezzanine_small50.JPG

 

 Workbenches_small16.JPG  Workbenches_small48.JPG Workbenches_small56.JPG Workbenches_small17.JPG

Cable_rack_small18.JPG

Cable Racks

Shelving_with_bins_small7.JPG

Shelving with bins

Pigeon_Hole_small1.JPG

Pigeon Hole racks

Clothes_rack_small4.JPG

Clothes Hanging Racks

 

SPAR Racking products currently conform to AS 4084-2012 standards. The standards changed a bit last from the existing ones which were about 20 years old and we have had to retest our products to meet these stringent standards.

This Standard was prepared by the Standards Australia Committee BD-062, Steel Storage Racking, to supersede AS 4084—1993, Steel storage racking. The objective of this Standard is to provide designers of steel storage racking with specifications for hot-rolled and cold-formed steel structural members used for action carrying purposes. The design provisions of the Standard are based on the limit states method and are intended to supplement AS 4100 and AS/NZS 4600. This edition incorporates the following major changes to the previous edition: (a) The Standard is in limit states format. (b) The Standard provides for internal actions to be determined by linear, geometric nonlinear, and material and geometric nonlinear analyses. (c) The Standard contains a comprehensive range of tests for determining the stiffness and strength of rack components and subassemblies. Reference has been made to the European Racking Code (EN 15512) and the American Rack Manufacturers Institute Specification (RMI). The term ‘normative’ is used in this Standard to define the application of the appendix to which it applies. A normative appendix is an integral part of a Standard.

Powered by liveSite